Installation Manual
Table Of Contents
- About This Guide
- Overview
- Hardware Overview
- Ethernet Cables
- WEB Management
- Configuration by Web Browser
- About Web-based Management
- Basic Setting
- System Information
- Admin & Password
- Auth Method
- IP Setting
- HTTPS
- SSH
- LLDP
- Backup/Restore Configuration
- Firmware Update
- DHCP Server
- Port Setting
- Port Trunk
- LACP
- Redundancy
- MSTP
- STP
- VLAN
- VLAN Setting Example
- SNMP
- Traffic Prioritization
- Multicast
- Security
- AAA
- RADIUS Overview
- Warning
- System Warning
- Monitor and Diag
- Port Statistic
- System Log Information
- Cable Diagnostics
- SFP Monitor
- Ping
- Syncronization-PTP
- PoE Configuration
- Status
- Factory Defaults
- System Reboot
- Configuration by Web Browser
- Command Line Interface Management
- Technical Specifications
INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 137
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
LED indicators
Power (PWR) Green: Power indicator
Ring Master (R.M.) Green: Indicates that the system is operating in C-Ring Master mode
C-Ring (Ring) Green: Indicates that the system operating in C-Ring mode
Green Blinking: Indicates that the Ring is broken.
Fault Amber : Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 Port Green for Link/Act indicator
100/1000Base-X SFP Port Green for port Link/Act.
PoE Green : PoE enabled LED × 24
Fault contact
Relay None
Power
Power Input 100~240VAC with power socket
Power supply 450 Watts power supply included
Power consumption (Typ.) 37 Watts
Overload current protection Present
Reverse Polarity Protection Not Present
Physical Characteristic
Enclosure 19 inches rack mountable
Dimension (W x D x H) 431 (W) × 342 (D) × 44 (H) mm (16.97 × 13.47 × 1.73 inch)
Weight (g) 5000 g
Environmental
Storage Temperature -40 to 85ºC (-40 to 185ºF)
Operating Temperature -10 to 60ºC (14 to 140ºF )
Operating Humidity 5% to 95% Non-condensing