Installation Manual

INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 133
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
IPMC
IPMC>
Configuration [igmp]
Mode [igmp] [enable|disable]
Flooding [igmp] [enable|disable]
VLAN Add [igmp] <vid>
VLAN Delete [igmp] <vid>
State [igmp] [<vid>] [enable|disable]
Querier [igmp] [<vid>] [enable|disable]
Fastleave [igmp] [<port_list>] [enable|disable]
Router [igmp] [<port_list>] [enable|disable]
Status [igmp] [<vid>]
Groups [igmp] [<vid>]
Version [igmp] [<vid>]
Fault
Fault>
Alarm PortLinkDown [<port_list>] [enable|disable]
Alarm PowerFailure [pwr1|pwr2|pwr3] [enable|disable]
Event
Event>
Configuration
Syslog SystemStart [enable|disable]
Syslog PowerStatus [enable|disable]
Syslog SnmpAuthenticationFailure [enable|disable]
Syslog RingTopologyChange [enable|disable]
Syslog Port [<port_list>] [disable|linkup|linkdown|both]
SMTP SystemStart [enable|disable]
SMTP PowerStatus [enable|disable]
SMTP SnmpAuthenticationFailure [enable|disable]
SMTP RingTopologyChange [enable|disable]
SMTP Port [<port_list>] [disable|linkup|linkdown|both]
DHCPServer
DHCPServer>
Mode [enable|disable]
Setup [<ip_start>] [<ip_end>] [<ip_mask>] [<ip_router>] [<ip_dns>] [<ip_tftp>]
[<lease>] [<bootfile>]