Installation Manual
Table Of Contents
- About This Guide
- Overview
- Hardware Overview
- Ethernet Cables
- WEB Management
- Configuration by Web Browser
- About Web-based Management
- Basic Setting
- System Information
- Admin & Password
- Auth Method
- IP Setting
- HTTPS
- SSH
- LLDP
- Backup/Restore Configuration
- Firmware Update
- DHCP Server
- Port Setting
- Port Trunk
- LACP
- Redundancy
- MSTP
- STP
- VLAN
- VLAN Setting Example
- SNMP
- Traffic Prioritization
- Multicast
- Security
- AAA
- RADIUS Overview
- Warning
- System Warning
- Monitor and Diag
- Port Statistic
- System Log Information
- Cable Diagnostics
- SFP Monitor
- Ping
- Syncronization-PTP
- PoE Configuration
- Status
- Factory Defaults
- System Reboot
- Configuration by Web Browser
- Command Line Interface Management
- Technical Specifications
INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 125
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
Security Network
Security/Network>
Psec Port Security Status
NAS Network Access Server (IEEE 802.1X)
ACL Access Control List
DHCP Dynamic Host Configuration Protocol
Security Network Psec
Security/Network/
Psec>
Switch [<port_list>]
Port [<port_list>]
Security Network NAS
Security/Network/NAS>
Configuration [<port_list>]
Mode [enable|disable]
State [<port_list>] [auto|authorized|unauthorized|macbased]
Reauthentication [enable|disable]
ReauthPeriod [<reauth_period>]
EapolTimeout [<eapol_timeout>]
Agetime [<age_time>]
Holdtime [<hold_time>]
Authenticate [<port_list>] [now]
Statistics [<port_list>] [clear|eapol|radius]