Installation Manual
Table Of Contents
- About This Guide
- Overview
- Hardware Overview
- Ethernet Cables
- WEB Management
- Configuration by Web Browser
- About Web-based Management
- Basic Setting
- System Information
- Admin & Password
- Auth Method
- IP Setting
- HTTPS
- SSH
- LLDP
- Backup/Restore Configuration
- Firmware Update
- DHCP Server
- Port Setting
- Port Trunk
- LACP
- Redundancy
- MSTP
- STP
- VLAN
- VLAN Setting Example
- SNMP
- Traffic Prioritization
- Multicast
- Security
- AAA
- RADIUS Overview
- Warning
- System Warning
- Monitor and Diag
- Port Statistic
- System Log Information
- Cable Diagnostics
- SFP Monitor
- Ping
- Syncronization-PTP
- PoE Configuration
- Status
- Factory Defaults
- System Reboot
- Configuration by Web Browser
- Command Line Interface Management
- Technical Specifications
INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 107
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
System Log Information
The switch system log information is provided here.
Label Description
ID The ID (>= 1) of the system log entry.
Level The level of the system log entry. The following level types are supported:
Info: Information level of the system log.
Warning: Warning level of the system log.
Error: Error level of the system log.
All: All levels.
Time The time of the system log entry.
Message The MAC Address of this switch.
Auto-Refresh Check this box to enable an automatic refresh of the page at regular intervals.
Refresh Updates the system log entries, starting from the current entry ID.
Clear Flushes all system log entries.
|<< Updates the system log entries, starting from the first available entry ID.
<< Updates the system log entries, ending at the last entry currently displayed.
>> Updates the system log entries, starting from the last entry currently displayed.
>>| Updates the system log entries, ending at the last available entry ID.