Installation Manual
Table Of Contents
- About This Guide
- Overview
- Hardware Overview
- Ethernet Cables
- WEB Management
- Configuration by Web Browser
- About Web-based Management
- Basic Setting
- System Information
- Admin & Password
- Auth Method
- IP Setting
- HTTPS
- SSH
- LLDP
- Backup/Restore Configuration
- Firmware Update
- DHCP Server
- Port Setting
- Port Trunk
- LACP
- Redundancy
- MSTP
- STP
- VLAN
- VLAN Setting Example
- SNMP
- Traffic Prioritization
- Multicast
- Security
- AAA
- RADIUS Overview
- Warning
- System Warning
- Monitor and Diag
- Port Statistic
- System Log Information
- Cable Diagnostics
- SFP Monitor
- Ping
- Syncronization-PTP
- PoE Configuration
- Status
- Factory Defaults
- System Reboot
- Configuration by Web Browser
- Command Line Interface Management
- Technical Specifications
INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 103
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
MAC Table
Each page shows up to 999 entries from the MAC table, default being 20, selected through the
“entries per page” input field. When first visited, the web page will show the first 20 entries from
the beginning of the MAC Table. The first displayed will be the one with the lowest VLAN ID and
the lowest MAC address found in the MAC Table.
The “Start from MAC address” and “VLAN” input fields allow the user to select the starting point
in the MAC Table. Clicking the Refresh button will update the displayed table starting from that
or the closest next MAC Table match. In addition, the two input fields will – upon a Refresh button
click – assume the value of the first displayed entry, allowing for continuous refresh with the same
start address.
The >>| will use the last entry of the currently displayed VLAN/MAC address pairs as a basis for
the next lookup. When the end is reached the text “no more entries” is shown in the displayed
table. Use the |<< button to start over.
Label Description
Type Indicates whether the entry is a static or dynamic entry.
MAC address The MAC address of the entry.
VLAN The VLAN ID of the entry.
Port Members The ports that are members of the entry.