System information

64
5.26.2 Event Configuration
Select the system log events. When selected events occur, the system will send out the
log information. Also, per port log events can be selected.
 System event selection: 4 selections – device cold start, power status, SNMP
Authentication Failure, and X-Ring topology change. Mark the checkbox to select
the event. When selected events occur, the system will produce the logs.
 Device cold start: when the device executes cold start action, the system will
produce a log message.
 Power status: when the device power status has changed, the system will
produce a log message.
 SNMP Authentication Failure: when the SNMP authentication fails, the
system will produce a log message.
 X-Ring topology change: when the X-Ring topology has changed, the system
will produce a log message.
 Port event selection: select the per port events. Per port has 3 selections – Link
UP, Link Down, and Link UP & Link Down. Disable means no event is selected.
 Link UP: the system will produce a log message when port connection is up
only
 Link Down: the system will produce a log message when port connection is
down only
 Link UP & Link Down: the system will produce a log message when port
connection is up and down
 Select after selecting