System information

43
the network DHCP server will assign the IP address for the switch and display it in
this column. The default IP Address is 192.168.16.1.
 Subnet Mask: Assign the subnet mask of the IP address. If DHCP client function is
enabled the user does not need to assign the subnet mask.
 Gateway: Assign the network gateway for the CWFE8MS-DIN switch. The default
gateway is 192.168.16.254.
IP configuration interface
5.12 SNTP Configuration
Configure the SNTP (Simple Network Time Protocol) settings that allow SNTP users to
synchronize the switch’s clock to the Internet.
1. SNTP Client: enable or disable SNTP function to get the time from the SNTP server
2. Daylight Savings Time: enable or disable daylight savings time function. When
daylight savings time is enabled, the user needs to configure the daylight savings
time period
3. UTC Timezone: Set the switch’s time zone location.
4. SNTP Sever IP: Set the SNTP server IP address
5. Switch Timer: Display the switch’s current set time
6. Daylight Saving Period: Configure the daylight savings time period