Datasheet

INS_CNVETX1_REV– 06/10/13 PAGE 23
INSTALLATION AND OPERATION MANUAL CNVETX1
TECH SUPPORT: 1.888.678.9427
Table 6: Menu Options for Decoder Operation Mode
Decoder Options Menu Suboption Description
General About Displays general information about the application
Live Video Displays live video feed
PTZ Control Allows controlling of a Pan Tilt Zoom (PTZ) camera
Alarms & Contact
Closures
Enables setting (1 or 0) Relay Output, reading input status
Video Settings Decoder Profiles Defines up to 16 decoding profiles settings
Display
Configuration
Selects the decoding profile to be used
Video Analytics Response
Management
Enables event responses management for single or multiple
sources
Event Management HTTP Post Settings Enables setting HTTP server for receiving events
System Serial Port Settings Enables setting RS232 and RS422/485 terminal settings
Network Settings Enables setting network settings (Host name, IP Address, etc.)
Change Password Enables changing your password
Clock Setup Enables setting the real time clock
SNMP Settings Enables SNMP enterprise traps and thresholds
Operation Settings Enables switching between Encoder / Decoder operation
modes
Firmware Upgrade Enables updating the firmware
System
Administration
Reset User
Password
Resets user password
Change sysadmin
Password
Changing system password
Factory Defaults Returns to factory defaults
Change Web
Interface Language
Changing Web Language
Reset Resets the unit (Hardware reset may take up to 60 sec.)