Datasheet

INS_CNVETX1_REV– 06/10/13 PAGE 21
INSTALLATION AND OPERATION MANUAL CNVETX1
TECH SUPPORT: 1.888.678.9427
Table 5: Menu Options for Encoder Operation Mode
Encoder Option Menu Suboption Description
General About Displays general information about the application
Live Video Displays live video feed from the connected video source
PTZ Control Allows controlling of a Pan Tilt Zoom (PTZ) camera
Alarms & Contact
Closures
Enables setting (1 or 0) Relay Output, reading input status
Video Settings Analog Video Enables setting analog video settings
Audio Settings Analog Audio Enables setting analog audio settings
Streaming General Enables setting general streaming parameters
Auto Start Enables multicast Auto Start and configure parameters
Running Streams Displays running streams
Video Encoding
Parameters
Video encoding general parameters
OSD
Enables On-Screen-Display (OSD)
MPEG-4
Enables setting MPEG-4
MPEG-2
Enables setting MPEG-2
H.264
Enables setting H.264
MJPEG
Enables setting MJPEG
Video Analytics Software Activation Enables local key activation
General Enables setting video overlay configuration, resetting analytics
configuration
Rule Management Enables setting up rules
OnBoard
Configuration
Enables configuring the views
Response
Management
Enables event responses management for single or multiple
sources
Event Management HTTP Post Settings Enables setting HTTP server for receiving events
System Serial Port Settings Enables setting RS232 and RS422/485 terminal settings
Network Settings Enables setting network settings (Host name, IP Address, etc.)
Change Password Enables changing your password
Clock Setup Enables setting the real time clock
SNMP Settings Enables SNMP enterprise traps and thresholds
Operation Settings Enables switching between Encoder / Decoder operation modes
Firmware Upgrade Enables updating the firmware