Spec Sheet

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
CNGEMC4+2[POE][HO]/M
10/100/1000 Mbps Intelligent
Media Converter with Optional PoE+
SPECIFICATIONS
A
GENCY COMPLIANCE
Data
Data Interface Ethernet
Data Rate 10/100/1000 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Ports/Full
Duplex Optical Port
Electrical CNGEMC4+2POE/M Ports 1-4: 30 W Max
CNGEMC4+2POEHO/M Ports 1-4: 60 W Max
Connectors
Optical¹ Requires selection of sold-separately SFP modules.
See ComNet data sheet for number
and description of SFP modules.
Serial Mini USB
I/O Terminal Block
Power Terminal Block
Data RJ45
Management
HTTP Web GUI Smart Interface
CLI Serial Command Line Interface
Contacts (PoE Models Only)
Response Time 25ms typical (network dependent)
Input/Output Channels 2
Inputs 2 × Dry Closure
Outputs 2 × Form A contacts (Rated 1A @ 24 VDC, non-
resistive loads)
Power
Operating Voltage Dual 48 to 56 VDC PoE, 9 to 36 VDC
or 24 VAC non PoE
Current Draw 246 W max with PoE, 6W max w/out PoE
Current Protection Automatic Resettable Solid-State Current Limiters
PoE Pin Assignment RJ45 port supports IEEE802.3at
End-point Positive (VCC+): RJ45 pin 1, 2
(RJ45 pin 1,2 and 4,5 on 60W ports)
Negative (VCC-): RJ45 pin 3, 6
(RJ45 pin 3,6 and 7,8 on 60W ports)
Electrical & Mechanical
Indicating LEDs Optical Link/Data Activity
Electrical Link/Data Activity
Power PoE Status
Circuit Board Meets IPC Standard
Size 4.1 × 3.7 × 2.2 in (10.4 × 9.4 × 5.6 cm)
Surface Mount Wall or Flat Surface Screw Attachment
Shipping Weight <2 lb / 0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)²
ORDERING INFORMATION
Part Number Description
CNGEMC4+2/M Small Surface Mount 6 Port Gigabit Ethernet Media Converter, 2 SFP FX, 4TX, 2 Contact Closure
CNGEMC4+2POE/M Small Surface Mount 6 Port Gigabit Ethernet Media Converter, 2 SFP FX, 4TX with 30W of PoE+ power, 2 Contact Closure
CNGEMC4+2POEHO/M Small Surface Mount 6 Port Gigabit Ethernet Media Converter, 2 SFP FX, 4TX with 60W of PoE+ power, 2 Contact Closure
Included Accessories DC Plug-in Power Supply, 90-264 VAC, 50-60 Hz (included with CNGEMC4+2/M only, for benign 0 to 50ºC applications only. Hardened power sup-
ply available, consult factory)
Options Power Supply for PoE Models (Extra charge, consult factory)
User-selection of SFP or CopperLine CL-SFP modules (Extra charge, see SFP data sheets for product numbers and compatibility before ordering)
[2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT2 or DINBKT4)
[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.