System information

INS_CNGE3FE7MS4_REV– Rev. 4.30.14 PAGE 98
INSTALLATION AND OPERATION MANUAL CNGE3FE7MS4
TECH SUPPORT: 1.888.678.9427
Commands Set List—SNTP command set
Commands Level Description Example
sntp enable G Enable SNTP function switch(config)#sntp enable
sntp daylight G Enable daylight saving time, if
SNTP function is inactive, this
command can’t be applied.
switch(config)#sntp daylight
sntp daylight-period
[Start time] [End time]
G Set period of daylight saving time,
if SNTP function is inactive, this
command can’t be applied.
Parameter format:
[yyyymmdd-hh:mm]
switch(config)# sntp daylight-period
20060101-01:01 20060202-01-01
sntp daylight-offset
[Minute]
G Set offset of daylight saving time,
if SNTP function is inactive, this
command can’t be applied.
switch(config)#sntp daylight-offset 3
sntp ip
[IP]
G Set SNTP server IP, if SNTP
function is inactive, this command
can’t be applied.
switch(config)#sntp ip 192.169.1.1
sntp timezone
[Timezone]
G Set timezone index, use “show
sntp timzezone” command to get
more information of index number
switch(config)#sntp timezone 22
show sntp P Show SNTP information switch#show sntp
show sntp timezone P Show index number of time zone
list
switch#show sntp timezone
no sntp G Disable SNTP function switch(config)#no sntp
no sntp daylight G Disable daylight saving time switch(config)#no sntp daylight