System information

INS_CNGE3FE7MS4_REV– Rev. 4.30.14 PAGE 78
INSTALLATION AND OPERATION MANUAL CNGE3FE7MS4
TECH SUPPORT: 1.888.678.9427
Command Line Interface Management
About CLI Management
Besides WEB-base management, CNGE3FE7MS4 also supports CLI management. You can use
console or telnet to management switch by CLI.
CLI Management by RS-232 Serial Console (9600, 8, none, 1, none)
Before Configuring by the RS-232 serial console, use an RJ45 to DB9-F cable to connect the
Switch’s RS-232 Console port to your PCs’ COM port.
Follow the steps below to access the console via RS-232 serial cable.
Step 1. From the Windows desktop, select on Start -> Programs -> Accessories ->
Communications -> Hyper Terminal