System information

INS_CNGE3FE7MS4_REV– Rev. 4.30.14 PAGE 75
INSTALLATION AND OPERATION MANUAL CNGE3FE7MS4
TECH SUPPORT: 1.888.678.9427
Port Monitoring
Port monitoring function supports TX (egress) only, RX (ingress) only, and both TX/RX
monitoring. TX monitoring sends any data that egress out checked TX source ports to a
selected TX destination port as well. RX monitoring sends any data that ingress in checked
RX source ports out to a selected RX destination port as well as sending the frame where
it normally would have gone. Keep all source ports unchecked in order to disable port
monitoring.
Port monitoring interface
Label Description
Destination Port The port will receive a copied frame from the source port for
monitoring purposes.
Source Port The port will be monitored. Mark the blank of TX or RX to be
monitored.
TX The frames come into switch port.
RX The frames receive by switch port.
Apply Select Apply to activate the configurations.
Clear Disable the function by unchecking all ports.
Help Show help file.