System information

INS_CNGE3FE7MS4_REV– Rev. 4.30.14 PAGE 59
INSTALLATION AND OPERATION MANUAL CNGE3FE7MS4
TECH SUPPORT: 1.888.678.9427
Traffic Prioritization
Traffic Prioritization includes 3 modes: port base, 802.1p/COS, and TOS/DSCP. By traffic
prioritization function, you can classify the traffic into four classes for differential network
application. IGS-3044GP(GC) series support 4 priority queues.
QoS policy
Traffic Prioritization interface
Label Description
QoS Mode Port-base: the output priority is determined by ingress port.
COS only: the output priority is determined by COS only.
TOS only: the output priority is determined by TOS only.
COS first: the output priority is determined by COS and TOS, but COS first.
TOS first: the output priority is determined by COS and TOS, but TOS first.
QoS policy Using the 8,4,2,1 weight fair queue scheme: the output queues will follow
8:4:2:1 ratio to transmit packets from the highest to lowest queue.
For example: 8 high queue packets, 4 middle queue packets, 2 low queue
packets, and the one lowest queue packets are transmitted in one turn.
Use the strict priority scheme: always the packets in higher queue will be
transmitted first until higher queue is empty.
Apply Select Apply to set the configurations.
Help Show help file.