System information

INS_CNGE3FE7MS4_REV– Rev. 4.30.14 PAGE 53
INSTALLATION AND OPERATION MANUAL CNGE3FE7MS4
TECH SUPPORT: 1.888.678.9427
Label Description
VLAN Operation Mode Select VLAN Operation Mode: Disable, Port Base, 802.1Q
GVRP Mode Enable/Disable GVRP function.
Management VLAN ID Management VLAN can provide network administrator a
secure VLAN to management Switch. Only the devices in the
management VLAN can access the switch.
Port Select the port to configure.
Link type Select Link Type from the following options:
Access Link: Single switch only, allows grouping of ports
by setting the same VID.
Trunk Link: Extended application of Access Link, allows
grouping of ports by setting the same VID
with 2 or more switches.
Hybrid Link: Both Access Link and Trunk Link are
available.
Hybrid(QinQ) Link: Allows one more VLAN tag in a original
VLAN frame.
Untagged VID Set the port default VLAN ID for untagged devices that connect
to the port. The range is 1 to 4094.
Tagged VIDs Set the tagged VIDs to carry different VLAN frames to other switch.
Apply
Select Apply to activate the configurations.