System information

INS_CNGE3FE7MS4_REV– Rev. 4.30.14 PAGE 49
INSTALLATION AND OPERATION MANUAL CNGE3FE7MS4
TECH SUPPORT: 1.888.678.9427
MSTP Instance interface
Label Description
Instance Set the instance from 1 to 15
State Enable or disable the instance
VLANs Set that VLAN will belong that instance
Proprietary (0-61440) A value used to identify the root bridge. The bridge with the
lowest value has the highest priority and is selected as the root. If
the value changes, You must reboot the switch. The value must be
a multiple of 4096 according to the protocol standard rule.
Apply Select Apply to activate the configurations.
MSTP Instance Port interface
Label Description
Instance Set the instance’s information except CIST
Port Select the port that you want to configure.
Priority (0-240) Decide that port should be blocked by priority in LAN. Enter a
multiple of 16, 0 through 240.
Path Cost
(1-200000000)
The cost of the path to the other bridge from this transmitting
bridge at the specified port. Enter a number 1 through
200000000.
Apply Select Apply to activate the configurations.