System information

INS_CNGE3FE7MS4_REV– Rev. 4.30.14 PAGE 48
INSTALLATION AND OPERATION MANUAL CNGE3FE7MS4
TECH SUPPORT: 1.888.678.9427
MSTP Port interface
Label Description
Port No. Select the port that you want to configure.
Priority (0-240) Select which port should be blocked by priority in LAN.
Enter a multiple of 16, 0 through 240.
Path Cost
(1-200000000)
The cost of the path to the other bridge from this transmitting
bridge at the specified port. Enter a number 1 through
200000000.
Admin P2P Some of the rapid state transactions that are possible within RSTP
are dependent upon whether the port in question can only be
connected to exactly one other bridge (i.e. It is served by a point-
to-point LAN segment), or whether it can be connected to two or
more bridges (i.e. It is served by a shared medium LAN segment).
This function allows the P2P status of the link to be manipulated
administratively.
True - P2P enabled.
False - P2P disabled.
Admin Edge Label
Admin Non STP Label
Apply Select Apply to activate the configurations.