System information

INS_CNGE3FE7MS4_REV– Rev. 4.30.14 PAGE 45
INSTALLATION AND OPERATION MANUAL CNGE3FE7MS4
TECH SUPPORT: 1.888.678.9427
Label Description
Path Cost (1-200000000) The cost of the path to the other bridge from this transmitting
bridge at the specified port. Enter a number 1 through
200,000,000.
Port Priority (0-240) Decide that port should be blocked by priority in LAN. Enter a
numerical value that is a multiple of 16, 0 through 240.
Admin P2P Some of the rapid state transactions that are possible within
RSTP are dependent upon whether the port concerned can
only be connected to exactly one other bridge (i.e. It is served
by a point-to-point LAN segment), or it can be connected to
two or more bridges (i.e. It is served by a shared medium LAN
segment). This function allows the P2P status of the link to be
manipulated administratively. True means P2P enabling. False
means P2P disabling.
Admin Edge The port directly connected to end stations, and it cannot
create bridging loop in the network. To configure the port as
an edge port, set the port to True.
Admin Non STP The port includes the STP mathematic calculation. True is not
including STP mathematic calculation. False is including the
STP mathematic calculation.
Apply
Select Apply to activate the configurations.