System information

INS_CNGE3FE7MS4_REV– Rev. 4.30.14 PAGE 36
INSTALLATION AND OPERATION MANUAL CNGE3FE7MS4
TECH SUPPORT: 1.888.678.9427
Port Status
The following information provides the current port status information.
Port Status interface
Rate Limit
Limit the traffic of all ports, including broadcast, multicast and flooded unicast. You can also
set Ingress or Egress to limit traffic received or transmitted bandwidth.
Rate Limit interface
Label Description
Ingress Limit Frame
Type
Set the mode of the Ingress port from:
All, Broadcast Only, Broadcast/Multicast or Broadcast/Multicast/
Flooded Unicast
Ingress The switch port received traffic. For no limit, set to zero (0).
Egress The switch port transmitted traffic. For no limit, set to zero (0).
Apply Select Apply to activate the configurations.