Ethernet Solutions - SERVINTERN

26
CLFE(X)UTP
Copperline Ethernet over
Unshielded Twisted Pair (UTP)
› Supports Pass-Through PoE
CLFE4US1TPC
4-port Ethernet
Unmanaged Switch with
UTP/Twisted Copper and
Coaxial Cable Extender
CLFE(X)COAX
Copperline Ethernet
over Coaxial Cable
› Supports Pass-Through PoE
The ComNet CopperLine CLFE(X)UTP Ethernet over UTP line consists of four
models that support 100Mbps Ethernet as well as Pass-through Power over
Ethernet (PoE) over twisted pair cable (CAT-5, UTP). These models support
transmission distances of up to 3,000 feet (914m) at 10Mbps, or 2,100 feet
(640m) at 100Mbps. The CLFE1UTP, the CLFE4UTP, CLFE8UTP and the
CLFE16UTP transport one, four, eight or sixteen channels respectively. The IEEE
802.3-compliant Ethernet electrical interface of these Ethernet extenders also
meets the requirements for IEEE 802.3af/ PoE power, passing-through up to 30
watts of power per port to the powered device (PD).
Available Models
CLFE1UTP Single channel Ethernet over UTP with Pass-through PoE
CLFE4UTP Four channel Ethernet over UTP with Pass-through PoE
CLFE8UTP Eight channel Ethernet over UTP with Pass-through PoE
CLFE16UTP Sixteen channel Ethernet over UTP with Pass-through PoE
The ComNet CopperLine CLFE4US1TPC is an unmanaged switch that combines
four individual Ethernet data channels over a single standard COAX or UTP
cable. Symmetric bandwidth assures full bandwidth transmission is maintained
over the entire operational distance for both uploads and downloads with
virtually zero packet loss. Bandwidth assurance provides the ability to transmit
multiple cameras on single camera runs with no information loss. Combined
with the CopperLine CLFE(X)COAX series or CLFE(X)UTP series multi-port
extenders up to 64 cameras can be transmitted to a central location on just 16
cables. The CLFE4US1TPC can be powered using standard camera 12 VDC or
24 VAC power supplies. It also can be powered by PoE eliminating the need for
remote site extra cost power supplies.
The ComNet CopperLine CLFE(X)COAX Ethernet over COAX line consists of
four models that supports 100Mbps Ethernet as well as Pass-through Power
over Ethernet (PoE) over standard 75Ω coaxial cable. These models support
transmission distances of up to 5,000 feet (1524m) at 10Mbps, or 1800 feet
(548m) at 100Mbps. The CLFE1COAX, the CLFE4COAX, CLFE8COAX and the
CLFE16COAX transport, one, four, eight or sixteen channels respectively. The
IEEE 802.3-compliant extenders also meets the requirements for IEEE 802.3af
PoE power, passing through up to 30 watts of power per port to the powered
device (PD).
Available Models
CLFE1COAX Single channel Ethernet over COAX with Pass-through PoE
CLFE4COAX Four channel Ethernet over COAX with Pass-through PoE
CLFE8COAX Eight channel Ethernet over COAX with Pass-through PoE
CLFE16COAX Sixteen channel Ethernet over COAX with Pass-through PoE
ETHERNET PRODUCT GUIDE | WWW.COMNET.NET