Ethernet Solutions - SERVINTERN

23
The ValueLine CNFE1EOC-M single channel and CNFE2EOC dual channel are
cost-effective, feature-rich media converters that support Ethernet over twisted
pair or coaxial cable. These units can extend distances between devices to as
much as 500 meters on Coaxial Cable or up to 3 kilometers on twisted pair at
data rates of up to 91 Mbps. Ethernet data may be transmitted over telephone-
grade twisted copper pair, legacy serial cabling, or standard 75Ω coaxial cable
circuits, making this unit ideal for those applications where it is desired to utilize
an existing installed base of copper wiring for Ethernet transmission.
Additional Features
› Distances up to 3km
› Five Year Warranty
A cost-effective ValueLine product that allows Ethernet based equipment to be
connected over coaxial cable. The CWFE1COAXM accepts common 10/100TX
Ethernet data and transports it over standard 75Ω coaxial CCTV cable at data
rates up to 100Mbps. The CWFE1COAXM can extend distances between IP
devices to as much as 305 meters on coaxial cable. The input port is a standard
RJ-45 connector and the output port is a standard BNC connector. This media
converter is designed to operate in environments typical for commercial security.
Additional Features
› Distances up to 305m
› Five Year Warranty
The CNFE1CL1MC series media converters accept common 10/100TX Ethernet
data and transport it over common 75Ω coaxial cable or twisted pair telephone
wire. The CNFE1CL1MC-M is a single, small-sized unit that can be surface mounted
where space is limited, while the CNFE2CL2MC is a dual channel media converter
that can be surface mounted or installed in a rack. These units can extend distances
between devices to as much as 500 meters on Coaxial Cable or up to 3000 meters
on twisted pair versus traditional CAT-5e/6 cable. The output ports are standard BNC
connectors or terminal blocks and the input ports are standard RJ-45 connectors.
Additional Features
› Distances up to 3km
› Lifetime Warranty
The CWFE1POCOAX Series transports Ethernet and camera/device operating
power between the remote device and head-end location using existing coaxial
cable. It eliminates the need to have a separate power source at the remote
location and provides operating power for the remote ComNet modem and
PoE device. Based on the IEEE 802.3af standard for Power over Ethernet (PoE),
the CWFE1POCOAX provides 15 Watts of operating power to the remote PSE
device. The CWFE1POCOAX transports Ethernet data at rates of up to 100Mbps
over a distance of 230 meters (750 feet) over standard 75Ω coaxial cable.
Additional Features
› Distances up to 230m
› Power over Coax source – meets IEEE 802.3af standard for PoE
› Five Year Warranty
CNFE1CL1MC-M and
CNFE2CL2MC
Hardened Ethernet to
COAX/UTP Media Converters
› EoVDSL2 Technology
CWFE1POCOAXM
Commercial Grade
Ethernet + Power to COAX
Media Converter
› Ethernet data rates of up to
100Mbps
CNFE1EOC-M and
CNFE2EOC
Commercial Grade
Ethernet to COAX/UTP
Media Converters
› EoVDSL2 Technology
CWFE1COAXM
Commercial Grade Single
Ethernet to COAX
Media Converter
› 305m distance
ETHERNET OVER COPPER MEDIA CONVERTERS