System information

INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 99
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
Commands Set List—TFTP command set
Commands Level Description Example
backup flash:backup_cfg G Save configuration to TFTP and need
to specify the IP of TFTP server and
the file name of image.
switch(config)#backup flash:backup_cfg
restore flash:restore_cfg G Get configuration from TFTP server
and need to specify the IP of TFTP
server and the file name of image.
switch(config)#restore flash:restore_cfg
upgrade flash:upgrade_fw G Upgrade firmware by TFTP and need
to specify the IP of TFTP server and
the file name of image.
switch(config)#upgrade lash:upgrade_fw
Commands Set List—SYSLOG, SMTP, EVENT command set
Commands Level Description Example
systemlog ip
[IP address]
G Set System log server IP address. switch(config)# systemlog ip 192.168.1.100
systemlog mode
[client|server|both]
G Specified the log mode switch(config)# systemlog mode both
show systemlog E Display system log. Switch>show systemlog
show systemlog P Show system log client & server
information
switch#show systemlog
no systemlog G Disable systemlog functon switch(config)#no systemlog
smtp enable G Enable SMTP function switch(config)#smtp enable
smtp serverip
[IP address]
G Configure SMTP server IP switch(config)#smtp serverip 192.168.1.5
smtp authentication G Enable SMTP authentication switch(config)#smtp authentication
smtp account
[account]
G Configure authentication account switch(config)#smtp account User
smtp password
[password]
G Configure authentication password switch(config)#smtp password
smtp rcptemail
[Index] [Email address]
G Configure Rcpt e-mail Address switch(config)#smtp rcptemail 1 Alert@
test.com
show smtp P Show the information of SMTP switch#show smtp
no smtp G Disable SMTP function switch(config)#no smtp
event device-cold-start
[Systemlog|SMTP|Both]
G Set cold start event type switch(config)#event device-cold-start
both
event authentication-failure
[Systemlog|SMTP|Both]
G Set Authentication failure event type switch(config)#event authentication-failure
both