System information

INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 97
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
Commands Set List—Port Mirroring command set
Commands Level Description Example
monitor rx G Set RX destination port of monitor
function
switch(config)#monitor rx
monitor tx G Set TX destination port of monitor
function
switch(config)#monitor tx
show monitor P Show port monitor information switch#show monitor
monitor
[RX|TX|Both]
I Configure source port of monitor
function
switch(config)#interface fastEthernet 2
switch(config-if)#monitor RX
show monitor I Show port monitor information switch(config)#interface fastEthernet 2
switch(config-if)#show monitor
no monitor I Disable source port of monitor
function
switch(config)#interface fastEthernet 2
switch(config-if)#no monitor