System information

INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 89
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
state
[Enable | Disable]
I Use the state interface configuration
command to specify the state mode
of operation for Ethernet ports. Use
the disable form of this command to
disable the port.
switch(config)#interface fastEthernet 2
switch(config-if)#state Disable
show interface
configuration
I show interface configuration status switch(config)#interface fastEthernet
2 switch(config-if)#show interface
configuration
show interface status I show interface actual status switch(config)#interface fastEthernet 2
switch(config-if)#show interface status
show interface accounting I show interface statistic counter switch(config)#interface fastEthernet
2 switch(config-if)#show interface
accounting
no accounting I Clear interface accounting
information
switch(config)#interface fastEthernet 2
switch(config-if)#no accounting