System information

INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 87
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
dhcpserver enable G Enable DHCP Server switch(config)#dhcpserver enable
dhcpserver lowip
[Low IP]
G Configure low IP address for IP pool switch(config)# dhcpserver lowip
192.168.1.1
dhcpserver highip
[High IP]
G Configure high IP address for IP poolswitch(config)# dhcpserver highip
192.168.1.50
dhcpserver subnetmask
[Subnet mask]
G Configure subnet mask for DHCP
clients
switch(config)#dhcpserver subnetmask
255.255.255.0
dhcpserver gateway
[Gateway]
G Configure gateway for DHCP clients switch(config)#dhcpserver gateway
192.168.1.254
dhcpserver dnsip
[DNS IP]
G Configure DNS IP for DHCP clients switch(config)# dhcpserver dnsip
192.168.1.1
dhcpserver leasetime
[Hours]
G Configure lease time (in hour) switch(config)#dhcpserver leasetime 1
dhcpserver ipbinding
[IP address]
I Set static IP for DHCP clients by port switch(config)#interface fastEthernet 2
switch(config-if)#dhcpserver ipbinding
192.168.1.1
show dhcpserver
configuration
P Show configuration of DHCP server switch#show dhcpserver configuration
show dhcpserver clients P Show client entries of DHCP server switch#show dhcpserver clinets
show dhcpserver
ip-binding
P Show IP-Binding information of
DHCP server
switch#show dhcpserver ip-binding
no dhcpserver G Disable DHCP server function switch(config)#no dhcpserver
security enable G Enable IP security function switch(config)#security enable
security http G Enable IP security of HTTP server switch(config)#security http
security telnet G Enable IP security of telnet server switch(config)#security telnet
security ip
[Index(1..10)] [IP Address]
G Set the IP security list switch(config)#security ip 1 192.168.1.55
show security P Show the information of IP security switch#show security
no security G Disable IP security function switch(config)#no security
no security http G Disable IP security of HTTP server switch(config)#no security http
no security telnet G Disable IP security of telnet server switch(config)#no security telnet