System information

INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 86
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
Symbol of Command Level.
Mode Symbol of Command Level
User EXEC E
Privileged EXEC P
Global configuration G
VLAN database V
Interface configuration I
Commands Set List—System Commands Set
Commands Level Description Example
show config E Show switch configuration switch>show config
show terminal P Show console information switch#show terminal
write memory P Save your configuration into
permanent memory (flash rom)
switch#write memory
system name
[System Name]
G Configure system name switch(config)#system name xxx
system location
[System Location]
G Set switch system location string switch(config)#system location xxx
system description
[System Description]
G Set switch system description string switch(config)#system description xxx
system contact
[System Contact]
G Set switch system contact window
string
switch(config)#system contact xxx
show system-info E Show system information switch>show system-info
ip address
[Ip-address] [Subnet-mask]
[Gateway]
G Configure the IP address of switch switch(config)#ip address 192.168.1.1
255.255.255.0 192.168.1.254
ip dhcp G Enable DHCP client function of
switch
switch(config)#ip dhcp
show ip P Show IP information of switch switch#show ip
no ip dhcp G Disable DHCP client function of
switch
switch(config)#no ip dhcp
reload G Halt and perform a cold restart switch(config)#reload
default G Restore to default Switch(config)#default
admin username
[Username]
G Changes a login username.
(maximum 10 words)
switch(config)#admin username xxxxxx
admin password
[Password]
G Specifies a password
(maximum 10 words)
switch(config)#admin password xxxxxx
show admin P Show administrator information switch#show admin