System information

INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 77
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
Power over Ethernet (PoE)
System setting
The following interface is the PoE setting interface. There are 8 ports (port 1 to port 8) act as
PSE (Power Supply Equipment) ports.
Label Description
Maximum Power Budget Set the maximum power available.
Power Limit Mode Max of AF/AT: Automatically detects the Powered Device (PD) and
selects the most suitable mode.
Class: Automatically determine how much power each
port reserves based on the class of the connected
PD.
Configuration: Each port power output follows the “Port Setting
---> Power Limit” value (36W Max).
Total Power Consumption Total Power Consumption for the switch in watts.
PoE Chip Temperature Temperature (ªC) of the Switch’s PoE Chip
PoE Chip Status Work status of the PoE chip.