System information

INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 48
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
MSTP Port interface
Label Description
Port No. Select the port that you want to configure.
Priority (0-240) Select which port should be blocked by priority in LAN.
Enter a multiple of 16, 0 through 240.
Path Cost
(1-200000000)
The cost of the path to the other bridge from this transmitting bridge at
the specified port. Enter a number 1 through 200000000.
Admin P2P Some of the rapid state transactions that are possible within RSTP are
dependent upon whether the port in question can only be connected
to exactly one other bridge (i.e. It is served by a point-to-point LAN
segment), or whether it can be connected to two or more bridges (i.e.
It is served by a shared medium LAN segment). This function allows the
P2P status of the link to be manipulated administratively.
True - P2P enabled.
False - P2P disabled.
Admin Edge Label
Admin Non STP Label
Apply Select Apply to activate the configurations.