System information

INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 35
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
Port Setting
Port Control
Set the state, speed/duplex, flow control, and security of the port.
Port Control interface
Label Description
Port No. Port number for setting.
State Enable/Disable the port.
Speed/Duplex Set Auto-negotiation, 100-full, 100-half, 10-full or 10-half mode.
Flow Control Support symmetric and asymmetric mode to avoid packet loss when
congestion occurred.
Security Enabling port security will disable MAC address learning in this port.
Only the frames with MAC addresses in the port security list will be
forwarded, otherwise the frames will be discarded.
Auto Detect 100/1000 Auto Detect SFP port SFP Module speed (100/1000Mbps)
Apply Select Apply to activate the configurations.