Manualshelf

System information

ManualsBrandsComnet ManualsComputer equipmentCNGE2FE8MSPOE
31323334353637383940
INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 32
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
Redundancy
DHCP Server
DHCP Server – Setting
The system provides with DHCP server function. Enable the DHCP server function and the
switch system will be a DHCP server.
DHCP Server Configuration interface
Label Description
DHCP Server Enable or Disable the DHCP Server function. Enable – the switch will be the
DHCP server on your local network
Start IP Address The dynamic IP assignment range. Low IP address is the beginning of the
dynamic IP assignments range. For example: dynamic IP assignment range
is from 192.168.1.100 to 192.168.1.200. 192.168.1.100 will be the Start IP
address.
End IP Address The dynamic IP assignment range. High IP address is the end of the dynamic
IP assignments range. For example: dynamic IP assignment range is from
192.168.1.100 to 192.168.1.200. 192.168.1.200 will be the End IP address
Subnet Mask The dynamic IP assignment range subnet mask
Gateway The gateway in your network.
DNS Domain Name Server IP Address in your network.
Lease Time (Hour) It is the period that system will reset the assigned dynamic IP to ensure the IP
address is in use.
Apply Select Apply to set the configurations.