System information

INS_CNGE2FE8MSPOE+_REV–
12/20/12 PAGE 104
INSTALLATION AND OPERATION MANUAL CNGE2FE8MSPOE+
TECH SUPPORT: 1.888.678.9427
Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (C-Ring) with recovery time < 10ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security
SNTP for synchronizing of clocks over network
Support PTP Client (Precision Time Protocol) clock synchronization
DHCP Server / Client support
Port Trunk support
MVR (Multicast VLAN Registration) support
Network Redundancy ComRing
C-Ring
Legacy Ring
C-RSTP
STP
RSTP
MSTP
Warning / Monitoring System Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support
RS232 Serial Console Port RS232 in RJ-45 connector with console cable. 9600Bps, 8, N, 1
LED indicators
Power/PoE Indicator Green: Power LED x 3, Green: PoE LED x 8
C-Ring Indicator Green: Indicate system operated in C-Ring mod
R.M. indicator Green: Indicate system operated in C-Ring Master mode
Fault indicator Amber: Indicate unexpected event occurred
10/100BASE-T(X) RJ45 Port Indicator Green: Link/Act. Amber: Duplex/Collision
10/100/1000BASE-T(X) RJ45
Port Indicator
Green: Link/Act. Amber: 100Mbps indicator
100/1000BASE-X Fiber
Port Indicator
Green: Link/Act.
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Dual DC inputs. 48–57VDC on 6-pin terminal block
Order optional ComNet Part PS48VDC-5A or PS48VDC-10A (depending on
per-port load and operation temperature)
Power Consumption (Typ.) 9 Watts (power consumption of PSE is not included)
Overload Current Protection Present
Reverse polarity protection Not Present
Physical Characteristic
Enclosure IP-30
Dimension (W × D × H) 74.3 × 109.2 × 153.6mm (2.93 × 4.3 × 6.05 in)