Data Sheet

07 Jul 2014
© 2014 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
CNGE2FE4SMS[POE][HO]
10/100/1000 Mbps Drop/Insert/Repeat
Gigabit Uplink Switch with Optional PoE+
SPECIFICATIONS
TYPICAL APPLICATION
ORDERING INFORMATION
Part Number Description
CNGE2FE4SMS 6 Port Gigabit and 10/100 Mbps Ethernet Self-managed Switch 2 SFP FX, 4TX
CNGE2FE4SMSPOE 6 Port Gigabit and 10/100 Mbps Ethernet Self-managed Switch 2 SFP FX, 4TX with 30W of PoE+ power
CNGE2FE4SMSPOEHO 6 Port Gigabit and 10/100 Mbps Ethernet Self-managed Switch, 2 SFP FX, 2TX with 60W of PoE+ power, 2TX with 30W of PoE+ power
Included Accessories DC Plug-in Power Supply, 90-264 VAC, 50-60 Hz (included with CNGE2FE4SMS only)
Options Power Supply for PoE Models (Extra charge, order model PS48VDC-5ADIN)
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve and advance technology, product
specifications are subject to change without notice.
Data
Data Interface Ethernet
Data Rate 10/100/1000 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Ports/Full
Duplex Optical Port
Electrical CNGE2FE4SMSPOE Ports 1 – 4: 30 W Max
CNGE2FE4SMSPOEHO Ports 1 and 2: 30 W Max
CNGE2FE4SMSPOEHO Ports 3 and 4: 60 W Max
Fibers
1
SFP Dependent
Connectors
Optical Requires selection of sold-separately SFP
modules. See ComNet data sheet for number
and description of SFP modules.
Power Terminal Block
Data RJ45
POE Pin Assignment RJ45 port supports IEEE802.3at
End-point Positive (VCC+): RJ45 pin 1, 2
(RJ45 pin 1,2 and 4,5 on 60W ports)
Negative (VCC-): RJ45 pin 3, 6
(RJ45 pin 3,6 and 7,8 on 60W ports)
LED Indicators - Optical Link/Data Activity
- Electrical Link/Data Activity
- Power - PoE
Power
Operating Voltage 48 to 57 VDC PoE, 12 to 24 VDC non-PoE
Current Draw 5A max, with PoE, 1A w/out PoE
Electrical & Mechanical
Surface Mount Wall or Flat Surface Screw Attachment
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight <2 lbs./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)
1
CNGE2FE4SMS
CNGE2FE4SMSPOE CNGE2FE4SMSPOEHO
CNGE2MC
4
1
2
3
4
4 11
Power Power Power
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
......
...
...
...
...
Fast Ethernet
Fast Ethernet
Fast Ethernet
30W PoE
INSERTINSERT INSERT
1000FX
Fiber
1000FX Fiber 1000FX Fiber
OPTICAL FIBER
COPPER CABLE
IP
Network
60W PoE
60W PoE
30W PoE
30W PoE