Specifications

INS_CNGE28FX4TX24MSPOE+_REV–
08/31/12 PAGE 87
INSTALLATION AND OPERATION MANUAL CNGE28FX4TX24MSPOE+
Tech SupporT: 1.888.678.9427
Cable Diagnostics
This page is used for running the VeriPHY Cable Diagnostics.
Press Start to run the diagnostics. This will take approximately 5 seconds. If all ports are selected,
this can take approximately 15 seconds. When completed, the page refreshes automatically, and
you can view the cable diagnostics results in the cable status table. Note that VeriPHY is only
accurate for cables of length 7 - 140 meters.
10 and 100 Mbps ports will be linked down while running VeriPHY. Therefore, running VeriPHY
on a 10 or 100 Mbps management port will cause the switch to stop responding until VeriPHY is
complete.
Label Description
Port The port where you are requesting VeriPHY Cable Diagnostics.
Cable Status Port: Port number.
Pair: The status of the cable pair.
Length: The length (in meters) of the cable pair.