Specifications

INS_CNGE28FX4TX24MSPOE+_REV–
08/31/12 PAGE 74
INSTALLATION AND OPERATION MANUAL CNGE28FX4TX24MSPOE+
Tech SupporT: 1.888.678.9427
Security
ACL
Configure the ACL parameters (ACE) of each switch port. These parameters will affect frames
received on a port unless the frame matches a specific ACE.
Label Description
Port The logical port for the settings contained in the same row.
Policy ID Select the policy to apply to this port. The allowed values are 1
through 8. The default value is 1.
Action Select whether forwarding is permitted (“Permit”) or denied (“Deny”).
The default value is “Permit”.
Rate Limiter ID Select which rate limiter to apply to this port. The allowed values are
Disabled or the values 1 through 15. The default value is “Disabled”.
Port Copy Select which port frames are copied to. The allowed values are
Disabled or a specific port number. The default value is “Disabled”.
Logging Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is “Disabled”. Please note that the System Log
memory size and logging rate is limited.
Shutdown Specify the port shut down operation of this port. The allowed values
are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is “Disabled”.
Counter Counts the number of frames that match this ACE.