Specifications

INS_CNGE28FX4TX24MSPOE+_REV–
08/31/12 PAGE 59
INSTALLATION AND OPERATION MANUAL CNGE28FX4TX24MSPOE+
Tech SupporT: 1.888.678.9427
SNMP
SNMP-System
Label Description
Mode Indicates the SNMP mode operation. Possible modes are: Enabled:
Enable SNMP mode operation.
Disabled: Disable SNMP mode operation.
Version Indicates the SNMP supported version. Possible versions are:
SNMP v1: Set SNMP supported version 1.
SNMP v2c: Set SNMP supported version 2c.
SNMP v3: Set SNMP supported version 3.
Read
Community
Indicates the community read access string to permit access to SNMP
agent. The allowed string length is 0 to 255, and the allowed content
is the ASCII characters from 33 to 126.
The field only suits to SNMPv1 and SNMPv2c. SNMPv3 is using
USM for authentication and privacy and the community string will
associated with SNMPv3 communities table
Write
Community
Indicates the community write access string to permit access to SNMP
agent. The allowed string length is 0 to 255, and the allowed content
is the ASCII characters from 33 to 126.
The field only suits to SNMPv1 and SNMPv2c. SNMPv3 is using USM
for authentication and privacy and the community string will be
associated with SNMPv3 communities table.
Engine ID Indicates the SNMPv3 engine ID. The string must contain an even
number between 10 and 64 hexadecimal digits, but all-zeros and
all-’F’s are not allowed. Change of the Engine ID will clear all original
local users.