Specifications

INS_CNGE28FX4TX24MSPOE+_REV–
08/31/12 PAGE 30
INSTALLATION AND OPERATION MANUAL CNGE28FX4TX24MSPOE+
Tech SupporT: 1.888.678.9427
Rate Limit
Configure the switch port rate limit for Police and Shapers on this page.
Label Description
Port The logical port for the settings contained in the same row.
Policer Enabled Enable or disable the port policer. The default value is “Disabled”.
Policer Rate Configure the rate for the port policer. The default value is “500”. This
value is restricted to 500-1000000 when the “Policer Unit” is “kbps”,
and it is restricted to 1-1000 when the “Policer Unit” is “Mbps”
Policer Unit Configure the unit of measure for the port policer rate as kbps or
Mbps. The default value is “kbps”.
Shaper Enabled Enable or disable the port shaper. The default value is “Disabled”.
Shaper Rate Configure the rate for the port shaper. The default value is “500”. This
value is restricted to 500-1000000 when the “Policer Unit” is “kbps”,
and it is restricted to 1-1000 when the “Policer Unit” is “Mbps”
Shaper Unit Configure the unit of measure for the port shaper rate as kbps or
Mbps. The default value is “kbps”.
Save Select to save changes.
Reset Select to undo any changes made locally and revert to previously
saved values.