Specifications

INS_CNGE28FX4TX24MSPOE+_REV–
08/31/12 PAGE 26
INSTALLATION AND OPERATION MANUAL CNGE28FX4TX24MSPOE+
Tech SupporT: 1.888.678.9427
Local Counters
Label Description
Local Port The port on which LLDP frames are received or transmitted.
TX Frames The number of LLDP frames transmitted on the port.
Rx Frames The number of LLDP frames received on the port.
Rx Errors The number of received LLDP frames containing some kind of error.
Frames DiscardedIf an LLDP frame is received on a port, and the switch’s internal table
has run full, the LLDP frame is counted and discarded. This situation is
known as “Too Many Neighbor’s” in the LLDP standard. LLDP frames
require a new entry in the table when the Chassis ID or Remote Port
ID is not already contained within the table. Entries are removed from
the table when a given port links down, an LLDP shutdown frame is
received, or when the entry ages out.
TLVs Discarded Each LLDP frame can contain multiple pieces of information, known as
TLVs (TLV is short for “Type Length Value”). If a TLV is malformed, it is
counted and discarded.
TLVs
Unrecognized
The number of well-formed TLVs, but with an unknown type value.
Org. Discarded The number of organizationally TLVs received.
Age-Outs Each LLDP frame contains information about how long time the LLDP
information is valid (age-out time). If no new LLDP frame is received
within the age out time, the LLDP information is removed, and the
Age-Out counter is incremented.
Refresh Select to refresh the page immediately.
Clear Clears the local counters. All counters (including global counters) are
cleared upon reboot.
Auto-refresh Check this box to enable an automatic refresh of the page at regular
intervals.