Specifications

INS_CNGE24MS_REV–
02/18/13 PAGE 80
INSTALLATION AND OPERATION MANUAL CNGE24MS
Tech SupporT: 1.888.678.9427
Warning
Fault Alarm
When any selected fault event is happening, the Fault LED in switch panel will light up and the
relay will signal at the same time.
The following table describes the labels in this screen.
Label Description
Power Failure Mark the blank of PWR 1 , PWR 2 or PWR 3 to monitor.
Port Link Down/
Broken
Mark the blank of port 1 to port 24 to monitor.
Apply Select Apply to set the configurations.