Specifications

INS_CNGE24MS_REV–

02/18/13 PAGE 8

INSTALLATION AND OPERATION MANUAL CNGE24MS

Tech SupporT: 1.888.678.9427

» LED for STA: Green: Indicates that the system ready. The LED is blinking when the system is

upgrading firmware

» LED for PWR: This LED lights on when the power module is activated.

» LED for R.M. (Ring master): When the LED lights on, this switch is designated as the ring

master of the Ring topology.

» LED for Ring: When the LED light on, the C-Ring is activated.

» LED for DEF: System resets to default configuration.

» LED for Ping: System is processing “PING” request.

» LED for RUN: System is operating continuously.

» LED for RMT: System is accessed remotely.

» LED for Fault: Indicates unexpected event occurred.

Rear Panel

The rear panel of CNGE24MS is displayed as below:

1 2 3

CNGE24MS Rear Panel

1. Power Switch

2. Power input for AC 100V~240V / 50~60Hz.

3. Power input for DC 36~72V and fault relay output