Specifications

INS_CNGE24MS_REV–
02/18/13 PAGE 79
INSTALLATION AND OPERATION MANUAL CNGE24MS
Tech SupporT: 1.888.678.9427
RADIUS Authentication Server Configuration
The table has one row for each RADIUS Authentication Server and a number of columns, which are:
Label Description
# The RADIUS Authentication Server number for which the
configuration below applies.
Enabled Enable the RADIUS Authentication Server by checking this box.
IP Address Enable fallback to local authentication by checking this box.
If none of the configured authentication servers are alive, the local
user database is used for authentication.
This is only possible if the Authentication Method is set to something
else than ‘none’ or ‘local’.
Port The UDP port to use on the RADIUS Authentication Server. If the
port is set to 0 (zero), the default port (1812) is used on the RADIUS
Authentication Server.
Secret The secret - up to 29 characters long - shared between the RADIUS
Accounting Server and the switch-stack.