Specifications

INS_CNGE24MS_REV–
02/18/13 PAGE 46
INSTALLATION AND OPERATION MANUAL CNGE24MS
Tech SupporT: 1.888.678.9427
Label Description
Port The switch port number of the corresponding STP CIST (and MSTI)
port.
Path Cost Controls the path cost incurred by the port. The Auto setting will
set the path cost as appropriate by the physical link speed, using
the 802.1D recommended values. Using the Specific setting, a
user-defined value can be entered. The path cost is used when
establishing the active topology of the network. Lower path cost ports
are chosen as forwarding ports in favor of higher path cost ports.
Valid values are in the range 1 to 200000000.
Priority Controls the port priority. This can be used to control priority of ports
having identical port cost. (See above).
Save Select to save changes.
Reset Select to undo any changes made locally and revert to previously
saved values.