Specifications

INS_CNGE24MS_REV–
02/18/13 PAGE 29
INSTALLATION AND OPERATION MANUAL CNGE24MS
Tech SupporT: 1.888.678.9427
Rate Limit
Configure the switch port rate limit for Policers and Shapers on this page.
Label Description
Port The logical port for the settings contained in the same row.
Policer Enabled Enable or disable the port policer. The default value is “Disabled”.
Policer Rate Configure the rate for the port policer. The default value is “500”. This
value is restricted to 500-1000000 when the “Policer Unit” is “kbps,”
and it is restricted to 1-1000 when the “Policer Unit” is “Mbps”
Policer Unit Configure the unit of measure for the port policer rate as kbps or
Mbps. The default value is “kbps.”
Shaper Enabled Enable or disable the port shaper. The default value is “Disabled.”
Shaper Rate Configure the rate for the port shaper. The default value is “500.” This
value is restricted to 500-1000000 when the “Policer Unit” is “kbps,”
and it is restricted to 1-1000 when the “Policer Unit” is “Mbps”
Shaper Unit Configure the unit of measure for the port shaper rate as kbps or
Mbps. The default value is “kbps.”
Save Select to save changes.
Reset Select to undo any changes made locally and revert to previously
saved values.