Specifications

INS_CNGE24MS_REV–
02/18/13 PAGE 23
INSTALLATION AND OPERATION MANUAL CNGE24MS
Tech SupporT: 1.888.678.9427
LLDP Neighbor Information
This page provides a status overview for all LLDP neighbors. The displayed table contains a row
for each port on which an LLDP neighbor is detected. The columns hold the following information:
Label Description
Local Port The port on which the LLDP frame was received.
Chassis ID The Chassis ID is the identification of the neighbor’s LLDP
frames.
Remote Port ID The Remote Port ID is the identification of the neighbor port.
System Name System Name is the name advertised by the neighbor unit.
Port Description Port Description is the port description advertised by the
neighbor unit.
System Capabilities System Capabilities describes the neighbor unit’s capabilities.
The possible capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+).
If the capability is disabled, the capability is followed by (-).
Management Address Management Address is the neighbor unit’s address that
is used for higher layer entities to assist the discovery by
the network management. This could for instance hold the
neighbor’s IP address.
Refresh Select to refresh the page immediately.
Auto-Refresh Check this box to enable an automatic refresh of the page at
regular intervals.