Data Sheet

ManualsBrandsComnet ManualsFiber Converter2 Channel 1000Mbps Ethernet Media Converter

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› Lifetime Warranty

› Full-duplex transmission of 10/100/1000 Mbps Ethernet

-10/100/1000 BASE-TX electrical port

- 1000 BASE-FX optical port when used with suitable

ComNet SFPs

› IEEE 802.3 compliant

› 10/100/1000 BASE-TX port supports auto-negotiation and

automatic MDI/MDI-X crossover for full and half-duplex

operation

› Uses customer-installed ComNet SFPs for compatibility

with a wide range of optical fibers, optical connector types,

and optical transmission distances of up to 120 km (SFPs

ordered separately)

› Designed for installation in harsh out-of-plant/

unconditioned industrial or roadside operating

environments (-40º to +75ºC ambient). Fully compliant with

the environmental requirements of NEMA TS-2 for Traffic

Signal Control Equipment

› Voltage transient protection on all power and signal input/

output line provide protection from voltage surges and

other transient events

› CNGE2MC and CNGE22MC are packaged in the exclusive

ComNet ComFit housing, and may be shelf, rack, or DIN-rail

mounted, and are hot-swappable when rack-mounted

› The 4-port count of the CNGE22MC makes this unit ideal for

those applications where rack density or shelf-space may be

limited.

› Mini-package size of the CNGE2MC-M allows the unit to be

installed in those locations where space is at a premium.

› LED status indicators for rapidly ascertaining the operating

status of the media convertor and the link

› Made in the USA

APPLICATIONS

› Optical transmission of Ethernet-compatible industrial

security access control systems, intercom systems, VOIP

(Voice over IP) telephony networks, and IP-compatible CCTV

camera surveillance networks

› Optical Ethernet transmission to wireless LAN access points

› Industrial Security, Transportation/ITS, and Industrial

Control/Factory Automation IP Networks

› Optical transmission of any Ethernet-compatible equipment

with a maximum data rate of 1000 Mbps

The ComNet

™

CNGE2MC and CNGE22MC are one-channel and two-channel, Gigabit

Ethernet electrical to optical media converters. These auto-negotiating devices

accept a 10/100/1000 Mbps electrical input and convert this to a 1000 Mbps (1Gbs)

optical output. These units use ComNet SFPs* (small form-factor pluggable) modules

for fiber and connector type, and distance. LED indicators confirm operational status.

All models are environmentally hardened with no electrical or optical adjustments

(Plug and Play). Packaged in the exclusive ComNet ComFit housing, the standard size

units may be either wall or rack mounted. The CNGE2MCM is available in a small size

package. The units are powered by an included 8-15VDC power supply.

CNGE2MC[M] & CNGE22MC

10/100/1000 Mbps Ethernet Media Converters

1 OR 2CONVERTERHARDENED FLEXIBILITYINCLUDED

* Small Form-Factor Pluggable Module. Sold separately.

Summary of content (2 pages)

PAGE 1
0/100/1000 Mbps Ethernet Media Converters CNGE2MC[M] & CNGE22MC INCLUDED HARDENED FLEXIBILITY CONVERTER 1 OR 2 The ComNet™ CNGE2MC and CNGE22MC are one-channel and two-channel, Gigabit Ethernet electrical to optical media converters. These auto-negotiating devices accept a 10/100/1000 Mbps electrical input and convert this to a 1000 Mbps (1Gbs) optical output. These units use ComNet SFPs* (small form-factor pluggable) modules for fiber and connector type, and distance.
PAGE 2
10/100/1000 Mbps Ethernet Media Converters CNGE2MC[M] & CNGE22MC SPECIFICATIONS Data Electrical & Mechanical Data Interface Ethernet Data Rate 10/100/1000 Mbps IEEE 802.3 Compliant Full Duplex or Half Duplex Electrical Port/Full Duplex Optical Port Current Protection Automatic Resettable Solid-State Current Limiters Circuit Board Meets IPC Standard Size ComFit: 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm) Small Size: 3.3 x 2.5 x 1.1 in. (8.4 x 6.4 x 2.8 cm) Shipping Weight <2 lbs./0.