Data Sheet

27 May 2016© 2016 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
CNGE11FX3TX8MS[POE][HO]
Environmentally Hardened Managed Ethernet Switch
3 SFP + 8 Electrical Ports with Optional 30 or 60 Watt PoE
SPECIFICATIONS
ORDERING INFORMATION
Part Number Description SFP Ports¹ RJ45 Ports
30W PoE+
Ports
60W PoE++
Ports
CNGE11FX3TX8MS Industrially Hardened 11 Port Gigabit Managed Ethernet Switch 3 8 0 0
CNGE11FX3TX8MSPOE Industrially Hardened 11 Port Gigabit Managed Ethernet Switch 3 8 8 0
CNGE11FX3TX8MSPOEHO Industrially Hardened 11 Port Gigabit Managed Ethernet Switch 3 8 4 4
Included Accessories DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included with CNGE11FX3TX8MS only, for benign 0 to 50ºC applications. Hardened power supply
available, consult factory)
Options ComNet Recommended Power Supply for PoE Units (Not Included, consult factory)
User selection of ComNet SFP (see SFP Modules data sheet for product numbers and compatibility before ordering)
[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
Connectors
10/100/1000Base-TX Ports 8 × RJ-45
100/1000Base-X Port 3 × SFP¹
Serial Console Port USB connector w/ console cable. 115200bps, 8, N, 1
Power 2 × 2-Pin Terminal Block
Fault Relay 3-Pin Terminal Block
Switch Properties
Switching latency 7 µs
Switching bandwidth 22 Gbps
VLANs Voice, Private, Multicast
Max. Available VLANs 256
IGMP multicast groups 128 for each VLAN
Port rate limiting User Defined
Processing Store-and-Forward
Priority Queues 4
Network Redundancy STP RSTP MSTP ERPS
MAC Table 8K MAC Addresses
Jumbo Frame Up to 9K Bytes
Security Features
Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
https / SSH enhance network security
Switch/port based, NAS, ACL, ARP inspection and IP sourceguard
AAA radius server authentication
TACACS+
Power
Input Power Redundant 12 to 57 VDC (non-PoE model)
Redundant 48 to 57 VDC (PoE models)
Power Consumption 25 W (typical, non-PoE)
265 W Max w/ PoE+ (CNGE11FX3TX8MSPOE)
425 W Max w/ PoE++ (CNGE11FX3TX8MSPOEHO)
Overload Current Protection Present
Mechanical
Indicating LEDs Power Indicator Power Fault Indicators
Fault Indicator RJ45 Port Indicator
SFP Port Indicator PoE Indicators
Size (H × W × D) 6.0 × 3.5 × 4.5 in (15.24 × 8.89 × 11.43 cm)
Installation DIN-Rail Mount
Weight 2.6 lb / 1.5 kg
Environmental
Storage Temperature –40 to 85º C
Operating Temperature -40 to +75º C
Operating Humidity 5% to 95% Non-condensing
MTBF >100,000 hours
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.3at for Power Sourcing Equipment (PSE) and PoE up to 30 watts per port
(CNGE11FX3TX8MSPOE and CNGE11FX3TX8MSPOEHO Only)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
Regulatory Compliance
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-
4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Rail EN50121-4
A
GENCY COMPLIANCE