Data Sheet

SPECIFICATIONS
ORDERING INFORMATION
TYPICAL APPLICATION
Contact
Response Time: 25 msec typical, network dependent
Input/Output Channels: 8
Inputs: Dry Contact Input
Outputs: 0 – 250V, 190mA (AC or DC)
Ethernet 10/100TX, 100FX
Number Of Fibers 1 or 2, SFP dependent
Fiber Connectors* Requires selection of sold-separately SFP
modules. See ComNet data sheet for number
and description of SFP modules.
Connectors
Power: Terminal Block
Optical: LC or SC (SFP dependent)
Data: RJ45
Contact Closure: Terminal Block
LED Indicators - Power - Link
- Com - Contact Closure
Electrical & Mechanical
Power:
Surface Mount: 9–12 VDC @ 350 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current
Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 × 5.3 × 1.1 in. (15.5 × 13.5 × 2.8 cm)
Shipping Weight: <1 lb./0.45 kg
Environmental
MTBF: >100,000 hours
Operating Temp: -40˚ C to +75˚ C
Storage Temp: -40˚ C to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)
†
* Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single
mode fiber needs to meet or exceed fiber standard ITU-T G.652
† May be extended to condensation conditions
‡ Distance may be limited by optical dispersion.
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve and advance
technology, product specifications are subject to change without notice.
OPTICAL FIBER
CAT5(e)/6
SFP
Dependent
SFP
Dependent
C C
CNFE8RCOECNFE8TCOE
Ethernet
8
8
8
8
Part Number Description
Fibers
Required
Optical
Power Budget
Maximum
Distance
‡
# Rack
Slots
CNFE8TCOE Contact to Ethernet Transmitter
SFP Dependent SFP Dependent SFP Dependent 1
CNFE8RCOE Contact to Ethernet Receiver
Accessories
Options
9 Volt DC Plug-in Power Supply, 90–264 VAC, 50/60 Hz (Included)
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
CNFE8(X)COE Series
Eight Channel Contact Closure over Ethernet
25 Jul 2011© 2011 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [e-mail]
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: [phone] | F: [phone] | [e-mail]