Data Sheet

ManualsBrandsComnet ManualsFiber Optic Transmission8 Contact Closure Input Transmitter Over Ethernet

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› NTCIP compatible

› Remote network configuration

› Saved to a web server based configuration, requires no

electrical or optical adjustments

› Tested and certified by an independent laboratory for

full compliance with the environmental requirements

(ambient operating temperature, mechanical shock,

vibration, humidity with condensation, high-line/low-line

voltage conditions and transient voltage protection) of

NEMA TS-1/TS-2 and the Caltrans Specification for Traffic

Signal Control Equipment.

› Voltage transient protection on all power and signal

input/output lines provides unconditional protection

from power surges and other voltage transient events.

› Power and Port status LED indicators

› Automatic resettable solid-state current limiters

› Hot-swappable rack modules

› Interchangeable between stand-alone or rack mount use –

ComFit

› Lifetime Warranty

DESCRIPTION

The ComNet™ CNFE8(X)COE transmits eight contact closures

over an Ethernet network. It is available with a 10/100TX RJ45

Ethernet connector and an SFP fiber optic interface. These

units can be one-to-one mapped over Ethernet or controlled

via a PC. Included is a driver that allows the CoE to read or

write contact information from a PC based application. A

software utility allows customers to search for this device that

is installed on the network. The CNFE8TCOE transmitter and

CNFE8RCOE receiver support Windows

Discovery. Distances

depend on which SFP (Small Form Pluggable) module is used.

The CNFE8(X)COE is environmentally hardened to operate

in extreme temperatures. LED indicators are provided for

confirming operating status. Packaged in the ComNet ComFit

housing, these units may be either wall, rack, or DIN-rail mounted

with the addition of the ComNet DINBKT1 adaptor plate.

APPEARANCE

CNFE8(X)COE

Eight Channel Contact Closure over Ethernet

APPLICATIONS

› Access Control Systems

› Building Automation and Environmental Control Systems

› Computer/Data Equipment

› Fire and Alarm Systems

› Traffic Signal Control Equipment SFP: Small Form-factor Pluggable Module

8 CC

TX COPPER

FX OPTICAL

Summary of content (2 pages)

PAGE 1
Eight Channel Contact Closure over Ethernet CNFE8(X)COE APPEARANCE 8 CC DESCRIPTION FEATURES The ComNet™ CNFE8(X)COE transmits eight contact closures over an Ethernet network. It is available with a 10/100TX RJ45 Ethernet connector and an SFP fiber optic interface. These units can be one-to-one mapped over Ethernet or controlled via a PC. Included is a driver that allows the CoE to read or write contact information from a PC based application.
PAGE 2
Eight Channel Contact Closure over Ethernet CNFE8(X)COE Series SPECIFICATIONS Contact Electrical & Mechanical Response Time: Input/Output Channels: Inputs: Outputs: 25 msec typical, network dependent 8 Dry Contact Input 0 – 250V, 190mA (AC or DC) Ethernet 10/100TX, 100FX Power: Surface Mount: Rack: Number of Rack Slots: Current Protection: 9–12 VDC @ 350 mA From Rack 1 Automatic Resettable Solid-State Current Limiters Meets IPC Standard 6.1 × 5.3 × 1.1 in. (15.5 × 13.5 × 2.8 cm) <1 lb./0.