Installation Manual

INS_CNFE3FX1TX2C/M Series
10/11/11 PAGE 18
INSTALLATION AND OPERATION MANUAL CNFE3FX1TX2C/M SERIES
TECH SUPPORT: 1.888.678.9427
Network Interface Configuration
Label Description
Host Name Assign a name to the device (this is used for CLI and SNMP functions)
Enable DHCP To enable or disable the DHCP client function. When DHCP client function is
enabled, the switch will be assigned the IP address from the network DHCP
server. The default IP address will be replaced by the IP address which the
DHCP server has assigned.
IP Address Assign the IP address that the switch will use. If DHCP client Function is
enabled, you do not need to assign the IP address.
Gateway Assign the network gateway for the switch.
Subnet MaskPrimary DNS Assign the subnet mask for the switch.
Primary DNS Assign the primary DNS IP address
Secondary DNS Assign the secondary DNS IP address
Apply Select Apply to set the configurations.
Note: A system reset must be performed after making changes to the network settings.