Installation Manual

INS_CNFE1(M,S)/(X)_REV–

05/26/11

PAGE 1

INSTALLATION AND OPERATION MANUAL

CNFE1(M,S)(1,2)(A,B)/(X)

10/100 MBPS ETHERNET ELECTRICAL

OPTICAL

MEDIA CONVERTER FOR INTERNAL MOUNTING

The CNFE1(M,S)(1,2)(A,B)/(X) Ethernet internal mounted media converters

are designed to transmit and receive 10/100 Mbps data over multimode or

single mode optical fiber. The electrical interface will Auto-Negotiate to a

10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical

interface operates at a 100 Mbps Ethernet rate. These media converters are

environmentally hardened to operate in extreme temperatures. LED indicators

are provided for rapidly ascertaining equipment operating status. The CNFE1/X

do not have a metal enclosure and are designed to be incorporated within a

device.

See Figures 1 – 3 for complete installation details. Figure A on Page 3, and

the associated text, details mounting instructions.

PAGE 1
INSTALLATION AND OPERATION MANUAL CNFE1(M,S)(1,2)(A,B)/(X) 10/100 Mbps Ethernet Electrical 1 Optical media converter for internal mounting The CNFE1(M,S)(1,2)(A,B)/(X) Ethernet internal mounted media converters are designed to transmit and receive 10/100 Mbps data over multimode or single mode optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate.
PAGE 2
INSTALLATION AND OPERATION MANUAL CNFE1(M,S)(1,2)(A,B)/(X) FIGURE 1 – TOP VIEW - 1 FIBER FIGURE 2 – TOP VIEW - 2 FIBER FIGURE 3 – SIDE VIEW FIGURE 4 – POWER CONNECTIONS – + Power Supply: 22-27 VAC @ 100mA or 8-24 VDC @ 220 mA OPTICS ARE SHOWN FOR BOARD ORIENTATION ONLY. ACTUAL OPTIC WILL VARY DEPENDING ON SPECIFIC PRODUCT ORDERED. Tech Support: 1.888.678.
PAGE 3
INSTALLATION AND OPERATION MANUAL WARNING: Unit is to be used with a Listed Class 2 power supply rated 22-27 VAC @ 100mA or 8-24 VDC @ 220 mA. CNFE1(M,S)(1,2)(A,B)/(X) Figure A – DIMENSIONS IMPORTANT SAFEGUARDS: A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient.