Data Sheet

24 Jul 2013
© 2013 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
CNFE1(M,S)/(X) SERIES
10/100 Mbps Ethernet Electrical To Optical
Media Converter for Internal Mounting
SPECIFICATIONS
TYPICAL APPLICATION
ORDERING INFORMATION
Data
Data Interface Ethernet
Data Rate 10/100 Mbps
IEEE 802.3 Compliant
Full or Half Duplex Electrical Port/
Full Duplex Optical Port
Connectors
Optical ST or SC, 1 or 2 Fibers
Power Screw Terminals
Electrical RJ45
LED Indicators - Optical Link/Data Activity - Power
Power
Operating Voltage Range 22-27 VAC or 8-24 VDC
Power Consumption 3W AC or 6W VDC
Electrical & Mechanical
Circuit Board Meets IPC Standard
Size (L×W×H) 1.9 × 1.9 × 1.1 in, (5 × 5 × 2.8 cm)
Shipping Weight <1 lbs./0.9 kg
Mounting Hardware (Not Included)
Screw Size 2.5 mm
Min. Standoff Height 8 mm
SAE requirements #2-56 × 3/16" long Nylon Pan Head Screw
as a minimum into a 3/16" Nylon Hex Standoff
that is #2-56 thread × 3/8" long minimum
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)
1
Part Number Description Connector
Fibers
Required Fiber
Optical Power
Budget
Maximum
Distance
CNFE1M1A/2 10/100 Mbps Ethernet 1310/1550nm ST 1 Multimode 10 dB 3 km (2 miles)
CNFE1M1B/2 10/100 Mbps Ethernet 1550/1310nm ST 1 Multimode 10 dB 3 km (2 miles)
CNFE1S1A/2 10/100 Mbps Ethernet 1310/1550nm ST 1 Singlemode 15 dB 20 km (12 miles)
CNFE1S1B/2 10/100 Mbps Ethernet 1550/1310nm ST 1 Singlemode 15 dB 20 km (12 miles)
CNFE1M2/3 10/100 Mbps Ethernet 1310nm SC 2 Multimode 10 dB 3 km (2 miles)
CNFE1S2/3 10/100 Mbps Ethernet 1310nm SC 2 Singlemode 15 dB 20 km (12 miles)
CNFE1M1A/4 10/100 Mbps Ethernet 1310/1550nm SC 1 Multimode 10 dB 3 km (2 miles)
CNFE1M1B/4 10/100 Mbps Ethernet 1550/1310nm SC 1 Multimode 10 dB 3 km (2 miles)
CNFE1S1A/4 10/100 Mbps Ethernet 1310/1550nm SC 1 Singlemode 15 dB 20 km (12 miles)
CNFE1S1B/4 10/100 Mbps Ethernet 1550/1310nm SC 1 Singlemode 15 dB 20 km (12 miles)
CNFE1M2/5 10/100 Mbps Ethernet 1310nm ST 2 Multimode 10 dB 3 km (2 miles)
Options DC Plug-in Power Supply (not included)
[1]Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
Mounting Hardware (not included)
OPTICAL FIBER
CAT5e
1 Fiber
EE
CNFE1M1A/2
CNFE1M1B/2